The Wölvhammer transcends traditional cycling footwear, drawing conceptual inspiration from mountaineering boots.
Lace-up design with gusseted tongue
Full grain leather and ballistic nylon shell
Aerogel in foot bed
Designed to pair with Bergraven Gaiters
For 2016, we've removed the outer zipper and velcro in favor of a lace-up design with a gusseted tongue to keep wet winter weather out and warmth in. The full grain leather and ballistic nylon shell provides a durable barrier while the waterproof membrane protects your feet from the elements. Aerogel in the foot bed blocks cold cleats from chilling your toes. When the snow gets deep, pair them with Bergraven Gaiters with the dedicated hook in the toe-box.
Waterproof-breathable membrane for moisture control, mid-calf height for weather protection and comfort,
gaiter hook for fatbiking in deep snow and added insulation above the ankle
200g Primaloft®; aerogel insole under the foot
100% full grain cowhide leather; 1680-denier ballistic nylon
Mountain rubber made by Vibram®, 2-bolt SPD-compatible or flat pedal
Fiberglass-injected nylon with high impact resistance
Waterproof gusseted tongue with external cord lace and cinch lock
Mens extra wide 38–50 (no size 49), full sizes only
Extra-wide last with high-volume upper profile for extra insulation space on top of the foot
SUGGESTED TEMPERATURE RANGE
0° (-18°C) to 25°F (-3°C)
0º to 25ºF / -18º to -3ºC Comfort
A simple lace-up closure with gusseted tongue keeps winter weather out and warmth in.
Aerogel, an ultra-thin, compression-resistant and waterproof insulator, in the foot bed blocks cold transfer from the pedals and allows the use of custom insoles.
A D-ring on on the toe integrates with our Bergraven gaiter to add additional warmth and keep snow out when in it gets deep.
Buy Local Now
A service that connects you with local retailers to buy our products directly.
Product in stock at location
Product in warehouse
Stock visibility unavailable
We are finding retailers for you based on your selection.
45N Size Guide
Footwear Sizing Assistant
Items needed: pen or pencil, large sheet of paper, tape-measure in millimeters.
Measure wearing socks that you will most often wear with these boots. You will be taking measurements of both feet!
STEP 1: Place a sheet of paper flat on the floor. Sit on a chair and place one foot on the paper. Apply pressure to your foot and trace the shape of that foot on the paper, carefully holding the pen vertically and perpendicular to the paper, tracing the foot as closely as possible without angling the pen in or out.
STEP 2: Using a tape-measure, measure the distance from the very bottom of the heel to the top of the longest toe, as illustrated in points A and B on the diagram. It is necessary to measure in three-digit millimeters (for example: 292mm)
STEP 3: Measure the distance spanning the ball of the foot at its widest point, as illustrated in points C and D on the diagram, using two or three digit millimeter measurements depending on the size of your foot.
STEP 4: Repeat the above steps for your other foot and compare the measurements. Find the longer of the two length measurements between your right and left feet, as well as the wider of the two width measurements.
STEP 5: Enter the longest length measurement and the widest width measurement in three-digit millimeters IN THE BOXES BELOW. Only enter one length measurement and one width measurement!
For best fit, we recommend trying on the boots at your local dealer!